Machine Shop

[KrisRoberts]

Does anyone have a recommendation for a good machine shop? I have some wheel spacers that I'd like to have milled down from 3/8" to 1/4".

Thanks!

Kris

[RandyC]

Call my buddies at-

Custom Machining Services
Milt Bush

They are on Riley St off Napa (near Friars and Morena Blvd).

Found their business card

5350 Riley St

(619) 297-2534

In the north county (Fallbrook) I use Miller Machine. Chuck Miller is a very good guy. I am also thinking AWR might be able to help you too.

[Philc]

I've allways used ESI off mission gorge road. allways had good luck with their heads and short blocks!

[froggy47]

You can buy cast (not billet) spacers for about $12. a pair.

[KrisRoberts]

Really, for a 5-120 bolt pattern - where?!?

[froggy47]

I'm not that familiar with that size pattern, but you might try Summit or Jegs or Pegasus before you turn down those. Or google it.

:)