Group buy on Bushings and mounts

[Chas]

First off, lets start with the rules of the group buy.

Group buy ends March 31st. Payment must be received by then. Parts ship April 3rd.
Shipping is a flat rate of $8.00.

Please paypal chasmoore04@yahoo.com
Checks and cash work too.

Parts are manufactured by MMR.

We are going to start with S, FC, and Miata.

Pricing below.

[Chas]

S13/14/15

Transmission mount: $45.00
This mount is machined from 6061-T6 Aluminum. Securely mounts manual transmission to crossmember for reduced drivetrain movement. Works well in high horsepower cars which can break stock type mounts. DOES NOT HAVE PROVISIONS FOR FACTORY EXHAUST HANGER. DRIVETRAIN NOISE WILL INCREASE GREATLY WHEN USING THIS MOUNT.
http://driftclub.net/trendline/transmountschassis.gif

Rear Subframe Mounts: $70.00
UHMW rear subframe mounts locate the subframe securely so that movement is virtually eliminated. Stock subframe retaining hardware is reused.
http://driftclub.net/trendline/240rsb.JPG

Engine Mounts: $55.00
Mounts install in place stock rubber engine mounts. Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated. Mounts produce more vibration than stock, but not as much as solid metal mounts. Includes new hardware.
http://driftclub.net/trendline/engmnt2.jpg

[Chas]

FC3S

DTSS Killers: $35.00
Eliminates rear steer feature in the stock rear suspension. Feature an Aluminum core incased in UHMW.
http://driftclub.net/trendline/dtss.jpg

Solid Rear Subframe Bushings $50.00
Solid rear subframe bushings reduce subframe movement and improve handling. Machined from UHMW.
http://driftclub.net/trendline/NADIFFMNT.gif

Solid Rear Diff Mounts: $45.00
Machined from BLACK UHMW Polyethylene. These mounts are much harder than polyurethane or rubber. They replace the rubber mounts on the BACK of the differential. These mounts will help to reduce differential movement and front mount breakage during acceleration. They fit all FC Rx-7s. Set includes 2 mounts.
http://driftclub.net/trendline/rx7diff.jpg

Engine Mounts: $50.00
Mounts install in place stock rubber engine mounts. Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated. Mounts produce more vibration than stock, but not as much as solid metal mounts. Includes new hardware.
http://driftclub.net/trendline/engmnt2.jpg

Transmission Mounts: $30.00
Mounts install in place stock rubber transmission mounts. Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated. Mounts produce more vibration than stock, but not as much as solid metal mounts. Includes new stainless hardware.
http://driftclub.net/trendline/engmnt2.jpg


EVEN BETTER DISCOUNT

Complete Drivetrain Mount Set: $115.00
Includes engine mounts, transmission mounts, and differential mounts listed above.
http://driftclub.net/trendline/FCCDMS2.JPG

[Chas]

Miata


Engine Mounts: $55.00
Mounts install in place stock rubber engine mounts. Feature an Aluminum core incased in UHMW. Fully threaded rod extends all the way through the mount so that mount breakage is eliminated. Mounts produce more vibration than stock, but not as much as solid metal mounts. Includes new hardware.
http://driftclub.net/trendline/engmnt2.jpg

Differential Mounts: $45.00
Mounts install in place stock rubber differential mounts. They limit drivetrain movement and help to prevent missed shifts.
http://driftclub.net/trendline/NADIFFMNT.gif